Blog
Release time: Jul 16,2015
Celebrating the successful installation of our company's equipment at the Chengde Electric Power Engineering site of Anhui Electric Power Construction Company No. 1. Customer satisfaction comes not only from product quality, but also from our reliable, friendly, and confident service team.
Release time: Jul 02,2015
100 Questions about Ready-Mix Concrete (21-40)
What is the difference between a water reducer and a pumping agent? Answer: A water reducer is an admixture that reduces the amount of water used while maintaining the workability of the concrete mix, thereby increasing the strength of the concrete. A pumping agent, on the other hand, is mainly composed of a water reducer, with a small amount of plasticizer and slump-retaining components added to facilitate concrete pumping.
Release time: Jul 02,2015
100 Questions about Ready-Mix Concrete (1-20)
What is ready-mix concrete? Answer: According to the requirements of the purchaser, components such as cement, water, sand, gravel, admixtures and mineral admixtures are mixed in a certain proportion at a mixing station, metered, mixed and sold, and transported by a mixing truck to the delivery point specified by the purchaser within a specified time.
Release time: Jul 02,2015
100 Questions about Ready-Mix Concrete (41-60)
What is the compressive strength of concrete? Answer: The compressive strength of concrete is the destructive load per unit area obtained by using standard methods for making, curing, and testing, with the unit being MPa.
Release time: Jul 02,2015
100 Questions about Ready-Mix Concrete (61-80)
Why are there three lines for each production mix ratio, and how should they be used? Answer: The first line is the theoretical mix ratio (i.e., the water content of sand and stone is zero), used by some plants. The second line is the production mix ratio used on dry days. The third line is the mix ratio used on rainy days and after rain.
Release time: Jul 02,2015
100 Questions about Ready-Mix Concrete (81-100)
How long is the setting time of premixed concrete? Answer: Generally, the initial setting time is 8-12 hours (4-6 hours in high temperature). The final setting time is 12-16 hours (5-7 hours in high temperature). In autumn and winter or during the transition between winter and spring, the final setting time may be between 18 and 24 hours. If it exceeds this limit, it belongs to concrete slow setting, and the mix ratio should be adjusted immediately or the admixture factory should be notified to reduce the slow setting component.
Release time: Jun 25,2015
Jinan Shitong Construction Machinery Co., Ltd. participated in the M&T Construction Machinery and Mining Machinery Exhibition in Sao Paulo, Brazil on June 9, 2015, achieving remarkable results.
Release time: May 05,2015
Our company's 120-story concrete mixing building has been put into use in Jieshou, Anhui.
Our company's 120-meter-high concrete mixing building has been put into operation in Jieshou, Anhui Province. It uses a large-angle belt conveyor for material feeding, occupying a relatively small area and suitable for compact production sites.
Release time: Nov 19,2014
The equipment for our company's Sri Lanka project has been successfully installed.
Warmly celebrate the successful export and installation of our company's equipment to Sri Lanka!
Product Keywords: Concrete mixing building, mobile mixing plant, mobile mixer, mixing plant, mixing building, concrete conveyor, concrete batching plant, cement silo, screw conveyor, Shandong mixer, mixer manufacturer, mixing plant manufacturer, concrete mixing plant, concrete mixing equipment
Address: Daliu Industry Garden Cuyun Lake Subdistrist Office Changqing Area Jinan, Mobile: +86-13805317877, Tel: International +86-531-87127958, Domestic +86-531-87428216, Fax: 86-531-87428218, E-mail: jinanshitong@126.com
Postal Code: 250307